Subject: From Roger Date: Thu, 14 Oct 2004 20:00:26 -0700 (PDT) From: Roger Mingle To: carnut@carnut.com Sub-frameing a 61 ford unibody pick-up with a mopar front end. Pic#1 It helps to have a compleate donor car. You get the sub-frame, steering column, brake petal & master cyl & in this case the motor. 318 cu.in. of police car 1984 Dodge diplamat. Pic#2 When removing the sub-frame you can take the steering box & upper a-frames off or you can take a hot saw to the unibody frame rail. Pic#3 Heres what you are dragging out from under. Notice the peice of unibody rail by the steering box. Pic#4 Just pull it out and trash it. Pic#5 Heres the 61 unibody Ford. Even tho it is a unibody it still has a full frame. You just cant take the bed off. Pic#6&7 351 Ford & C-6 ready to come out. Pic#9&10 The front sheet metal out of the way. George, Have taken over 40 pics. Here are the frist 10.Well 9 really. No #8 --------------------------------------------------------------------- [Image] [Image] [Image] [Image] [Image] [Image] [Image] [Image] [Image]